FX Aegis Pro
A booth that draws a crowd pays for itself. So does an open house where people stay long enough to ask a question. The Aegis Pro is built to be the reason they stop walking.
It is a 15 kg quadruped with 12 degrees of freedom and 48 N·m of peak joint torque, and it arrives with a library of dynamic motions already loaded. Backflips, bipedal standing, forward jumps, and handshakes work out of the box. A 4K wide-angle camera streams live, the remote controller is included, and so is one customized costume.
WEIGHT
15 kg
DEGREES OF FREEDOM
12 DOF
MAXIMUM SPEED
3.7 m/s
PAYLOAD
8 kg maximum
RUNTIME
1 to 2 hours
SLOPE CAPABILITY
30°
The work
The one that works the room
Faraday Future positions the Aegis Pro as the entry point to the Aegis series, built for display, brand activations, and interactive entertainment. That is a narrower job than a facility deployment, and it is a job this unit is genuinely good at.
It is the same agile platform as the base Aegis, packaged with everything needed to run an event: the wireless controller, the app connection, and a customized costume. The motion library is preloaded, so a staff member can operate it on day one without writing anything. Aluminum alloy and high-strength engineering plastics carry the weight of repeated setup, transport, and teardown, and the 8 kg payload leaves room for whatever you mount on top.
Motion library
Backflips, bipedal standing, forward jumps, handshakes, and a full set of preloaded dynamic motions. Nothing to program before the first demonstration.
Mobility
Up to 3.7 m/s, obstacle clearance to 35 cm, continuous stair climbing to 16 cm, and slopes to 30 degrees, with 48 N·m of peak joint torque.
Live video
A built-in 4K wide-angle camera with real-time streaming, so what the robot sees can go to a screen, a feed, or an operator standing somewhere else.
Ready to run
Remote controller, app connection, and one customized costume in the box. Over-the-air updates keep the motion set current after purchase.
IN THE BOX
What comes with the system
These are compact humanoid systems, 1310 mm tall and under 40 kg. They walk, they hold a conversation, and they are built to be programmed. They are not material handling equipment, and the payload figure below is the honest limit on that.
- One quadruped robot device
- One remote controller
- App connection
- One customized costume
- Preloaded dynamic motion library
- Over-the-air update capability
App control is in development. Faraday Future lists the app connection as included and app control as not yet released. Operation today runs through the included remote controller. If app control matters to your plan, ask us and we will request a release timeline in writing.
Development tooling is not available for this model yet. The Lifetime Premium Development & Skills Package and the EAI Curriculum Skill Foundation are both listed by Faraday Future as coming soon. The Aegis Pro ships today as an operate-and-demonstrate platform, not a development platform. If your program needs an SDK on day one, say so and we will point you at a model that has one.
Optional add-ons
FX Aegis battery
216 Wh lithium-ion, roughly 1.5 hours to a full charge, 1 to 2 hours of runtime. A second battery is the difference between a two hour event and a full day.
FX Aegis FHD touchscreen controller
A 5.5 inch FHD touchscreen with Hall-effect joysticks, connecting over Wi-Fi 5.
Faraday also lists a development toolchain and a curriculum package for this model, both marked as not yet released.
PHOTOS
See the robot, in action
Specifications
FX Aegis Pro specifications
Every figure below is supplied by Faraday Future. These are the manufacturer’s measurements under its own test conditions, not ours. Performance in your space will vary with surface, temperature, load, and duty cycle.
| Physical | |
|---|---|
| Dimensions standing (L × W × H) | 610 × 370 × 406 mm |
| Weight | 15 kg |
| Materials | Aluminum alloy and high-strength engineering plastics |
| Degrees of freedom | 12 DOF |
| Payload | 8 kg maximum |
| Maximum joint torque | 48 N·m |
| IP rating | IP32 |
| Movement | |
|---|---|
| Maximum movement speed | 3.7 m/s |
| Continuous stair climb height | 16 cm |
| Obstacle clearance height | 35 cm maximum |
| Slope capability | 30 degrees |
| Power | |
|---|---|
| Battery capacity | 216 Wh |
| Battery detail | Rated 5 Ah, nominal 4.6 Ah, 43.2 V |
| Runtime | 1 to 2 hours |
| Charging time | 1 hour |
| Rated power | 3500 W maximum |
| Operating voltage | Approximately 43.2 V |
| Input voltage | 110 V to 220 V |
| Sensing and interface | |
|---|---|
| Cameras | 4K wide-angle camera with real-time video streaming |
| IMU | Equipped |
| LiDAR | Not listed in current manufacturer documentation |
| Connectivity and control | |
|---|---|
| Telecommunication | Wi-Fi, Bluetooth |
| Controller | Included |
| App control | In development |
| Capability | |
|---|---|
| Preloaded motions | Backflips, bipedal standing, forward jumps, handshakes, and a library of dynamic motions |
| Onboard AI | Described by the manufacturer as built-in. No further detail published |
| Over-the-air updates | Supported |
| Intended use | |
|---|---|
| Manufacturer stated purpose | Education, research, and AI development |
WHAT WE ADD
The hardware is where it starts
We are the distributor, and we are also the secondary developer and integrator. On a unit that ships ready to operate, most of our work is on the other side: getting your people confident running it in front of a crowd.
Configuration
We set the unit up for how you will actually use it, including the motion set, the video feed, and anything you are mounting on the payload.
On-site integration
We install in person, work through your network and device policy, and test in the space where it will run.
Operator training
Your staff run the unit before we leave, including what to do when a crowd gets closer than planned. We stay reachable after that.
Procurement
What your purchasing office will ask for
Pricing depends on the number of units, spare batteries, the controller you choose, and whether installation and training are included. We put the whole thing in writing rather than quoting hardware alone.
Purchase orders are placed with Stokes Family Holdings, LLC, doing business as MOSO Robotics.
If you are buying against an event date, tell us the date. It changes what we prioritize.
Ask us for
Manufacturer specification sheets for the exact model quoted
Current FCC certification and Covered List documentation
Warranty terms and what they do and do not cover
A written scope covering configuration, installation, and training
Lead time and what it depends on
Tell us what the robot needs to do
Describe the task and the space. We will tell you what fits, and we will tell you if nothing does.