Master Edu
A robotics program is only as good as what students can change. The Master Edu is built to be opened up, reprogrammed, and handed to a class that has never written a line of code.
It is a compact humanoid, 1310 mm tall and 35 kg, with 25 degrees of freedom and a swappable battery. What separates it from the base model is the development ecosystem: the Intellectual & Interactive and Locomotion & Manipulation platforms, a visual programming environment, and the Openclaw no-code tool. A student can change how the robot moves and responds in an afternoon, and a research team can go further from the same starting point.
HEIGHT
1310 mm
WEIGHT
35 kg
DEGREES OF FREEDOM
25 DOF
RUNTIME
2 hours
PAYLOAD
3 kg max
The work
Built for learning, in both directions
The Master Edu shares its body with the standard Master: the same 25 degrees of freedom, the same 120 N·m peak joint torque, the same 500 Wh swappable battery, and up to two hours of runtime. The hardware is not what you are paying the difference for.
What the Edu adds is access. Over-the-air update capability keeps the system current. The Intellectual & Interactive platform governs how the robot converses and responds. The Locomotion & Manipulation platform governs how it moves. A basic visual programming environment sits on top of both, so an instructor can build a lesson around changing the robot’s behavior rather than around watching it. The Openclaw no-code tool lowers the barrier further for students and for research workflows that do not start with a programmer.
Conversation
Everyday topic conversation, environment and object questions and answers, and interactive queries about the attributes of an object in front of it.
Movement
Head, upper limb, and waist movement, and walking at up to 1.8 m/s. A high-precision 6-axis IMU handles balance, with obstacle avoidance to 50 mm.
Performance
Singing, poetry recitation, greeting, greeting gestures, and head pat interaction, with an interactive screen and lighting effects.
Development
Basic visual programming platform and the Openclaw no-code development tool, with continuous feature unlocks delivered over the air.
IN THE BOX
What comes with the system
These are compact humanoid systems, 1310 mm tall and under 40 kg. They walk, they hold a conversation, and they are built to be programmed. They are not material handling equipment, and the payload figure below is the honest limit on that.
- One humanoid robot device
- One remote controller
- Ecosystem Skill Package, which carries the platform access and development tools listed below
- Intellectual & Interactive platform access
- Locomotion & Manipulation platform access
- Basic visual programming platform
- Openclaw no-code development tool
- Over-the-air update capability
Listed as in development
Faraday Future lists the following as not yet released, to be delivered by future over-the-air update. They are not available at purchase.
- Companion mobile app
- Facial recognition, character profiles, custom knowledge base, wake word, and voice tone
- Motion remixing, video-to-motion, community sharing, and group choreography
PHOTOS
See the robot, in action
Specifications
FF Master Edu specifications
Every figure below is supplied by Faraday Future. These are the manufacturer’s measurements under its own test conditions, not ours. Performance in your building will vary with terrain, temperature, load, and duty cycle.
| Physical | |
|---|---|
| Dimensions (H × W × L) | 1310 × 460 × 210 mm |
| Weight | 35 kg |
| Materials | Magnesium alloy, aluminum alloy, high-strength engineering plastics, and polyurethane |
| Degrees of freedom | 25 DOF, hands not included |
| Payload capacity | 3 kg maximum |
| Maximum movement speed | 1.8 m/s |
| Peak joint torque | 120 N·m |
| Power | |
|---|---|
| Battery capacity | Approximately 500 Wh |
| Power supply method | Direct charging, swappable battery |
| Runtime | 2 hours |
| Charging time | 1.5 hours or less |
| Runtime | Varies by application |
| Charger output | 54.6 V, 10 A |
| Input voltage | 110 V to 220 V |
| Sensing and interface | |
|---|---|
| Cameras | RGB camera |
| LiDAR | Not equipped |
| IMU | High-precision 6-axis |
| Ultrasonic sensors | Not equipped |
| Other sensors | Head touch sensor |
| Obstacle avoidance range | 50 mm or less |
| Display | Interactive screen with lighting effects |
| Connectivity and control | |
|---|---|
| Telecommunication | Wi-Fi, Bluetooth |
| Controller | Included |
| Mobile app | In development |
| VR remote manipulation | Not supported on this model |
| Capability | |
|---|---|
| Body motion | Head movement, upper-limb movement, waist movement, and walking |
| Conversation | Everyday topic conversation, environment and object questions and answers, and interactive object attribute queries |
| Performance | Singing, poetry recitation, greeting, greeting gesture, and head pat interaction |
| Software and development | |
|---|---|
| Platform access | Intellectual & Interactive platform and Locomotion & Manipulation platform, with continuous over-the-air feature unlocks |
| Visual programming | Basic visual programming platform |
| Openclaw development tool | Supported |
| Over-the-air updates | Supported |
WHAT WE ADD
The hardware is where it starts
We are the distributor, and we are also the secondary developer and integrator. That second part is what turns a specification sheet into a system your program can actually run.
Secondary development
We build the behavior your site needs on top of the platform, so the robot does your task rather than a generic one.
On-site integration
We install in person, get the system onto your network, and test it in the room where it will be used.
Operator training
Your instructors and staff run the system before we leave, and we stay reachable after that.
Procurement
What your purchasing office will ask for
Pricing depends on the configuration, the secondary development your program needs, and whether installation and training are included. We put the whole thing in writing rather than quoting hardware alone, because hardware alone does not run a course.
Purchase orders are placed with Stokes Family Holdings, LLC, doing business as MOSO Robotics.
If you are working toward a budget cycle or a grant deadline, tell us the date. It changes what we prioritize.
Ask us for
Manufacturer specification sheets for the exact model quoted
Current FCC certification and Covered List documentation
Warranty terms and what they do and do not cover
A written scope covering configuration, installation, and training
Lead time and what it depends on
Tell us what the robot needs to do
Describe the task and the space. We will tell you what fits, and we will tell you if nothing does.